A Room Divider with Storage

We have an "open concept" apartment which basically means we don't have enough walls. My husband needs an office area so we rigged up this fancy room divider so he can have an awesome little alcove which I totally use during the day (I'm on his computer right now :). This is not the cheapest DIY, there is an initial investment of about $60 for the skinny bookshelves and about $30 for the wallpaper but you can choose cheaper paper. We could have just purchased a room divider for $70 but then we would not have had the excess storage that this project brings. Gotta put DVD's, CD's, computer games, books and RC cars somewhere. It's pretty messy in the back but it is tucked away so I don't mind it.

Here's how to make your own...
1. Purchase and assemble some skinny bookshelves. We got ours at Canadian Tire. You could do this with any kind of book shelf , even thicker ones.
2. Buy some wallpaper that you like and a piece of foam board if you want a gap between the book cases (costs $1.00 at the dollar store).
3. Position your bookshelves where you like them and measure any gap between the two. Cut out your foam board to fit in between the book shelves.Tape in place.
4. Cut your wallpaper to fit. If you need two sheets, attach them where they meet in the centre on the back with some sturdy tape. I used electrical tape but there are better tapes out there. Then tape the paper to the back of your shelves. You could probably use a spray adhesive if you have some.